Bash plate -

96 replies [Last post]
Mogas
  • Online Status: Offline
  • Joined: 21/07/2013
  • Posts:
  • Post Number: #51
PLEASE May someone send me

PLEASE

May someone send me the DXF file for the bash plate.

I don't even have the standard bash plate on my IO and desparately need one where I drive in South Africa.

mogas at me.com

Thanks

Rick

simmo777
simmo777's picture
  • Online Status: Offline
  • Joined: 01/11/2012
  • Posts:
  • Post Number: #52
Mogas

Mogas wrote:

PLEASE

May someone send me the DXF file for the bash plate.

I don't even have the standard bash plate on my IO and desparately need one where I drive in South Africa.

mogas at me.com

Thanks

Rick

 

mate emailing it to your 

 

mogas@me.com 

 

let me know if its the wrong email address

2002 5dr Pajero IO QA 2.0L Auto - Lifted, Locked!! 1.925 Low Range - Muddies (205/80/16) - Redback Extractors to 200cell cat to dump at diff Exhaust 

Mogas
  • Online Status: Offline
  • Joined: 21/07/2013
  • Posts:
  • Post Number: #53
Got it! Thanks so much

Got it!

Thanks so much Simmo.

The IO was never officially imported into South Africa as far as I know, the few that are here are "grey" imports so no parts backup.

As soon as I get back to the city I will have one cut.

Cheers

Rick

longmeri
  • Online Status: Offline
  • Joined: 24/07/2013
  • Posts:
  • Post Number: #54
Hi,the file says no longer

Hi,the file says no longer exiting,could you please send the diagram to longmeri@gmail.com.many thanks ray.that price is so cheap,I do not think anyone will do it vic,so have to do it myself.

bob_oz
bob_oz's picture
  • Online Status: Offline
  • Joined: 31/03/2011
  • Posts:
  • Post Number: #55
plate

if you are keen on 6mm alu then there are two other guys looking for a third to go in. cost would be around $172 + about $30 postage to VIC

.

Topher
  • Online Status: Offline
  • Joined: 04/02/2013
  • Posts:
  • Post Number: #56
Bashplate

Im trying to organise a bashplatel run. We need 3 minium and I would happily send it down to vic

01 ZR LWB, 2 sets of kumho KL71s on rims, custom one off belly plate, lukey sports exhaust and a right foot to suit!

Paolo5
  • Online Status: Offline
  • Joined: 30/06/2013
  • Posts:
  • Post Number: #57
count me in

I would like to get one. ( I live in NSW.)

simmo777
simmo777's picture
  • Online Status: Offline
  • Joined: 01/11/2012
  • Posts:
  • Post Number: #58
Seeent

longmeri wrote:

Hi,the file says no longer exiting,could you please send the diagram to longmeri@gmail.com.many thanks ray.that price is so cheap,I do not think anyone will do it vic,so have to do it myself.

Sent to  longmeri@gmail.com :)
 

2002 5dr Pajero IO QA 2.0L Auto - Lifted, Locked!! 1.925 Low Range - Muddies (205/80/16) - Redback Extractors to 200cell cat to dump at diff Exhaust 

longmeri
  • Online Status: Offline
  • Joined: 24/07/2013
  • Posts:
  • Post Number: #59
I have to say 200 dollars is

I have to say 200 dollars is good price,if I can not get a free one,I will want one too,

longmeri
  • Online Status: Offline
  • Joined: 24/07/2013
  • Posts:
  • Post Number: #60
big thanks,I just got my io

big thanks,I just got my io today,bought from auction,it going to be my first 4wd project,I am going to have this plate made in china,my dad know bit engineering things,and i am not in hurry,the great thing is I found chine have same model still prodction which as chang feng lie bao,they come with snorkel as well,I will find out if it will fit on io,coz I found here have no such parts,and it only cost 200 yuan(1 au dollar=5.5 yuan) plus postage,and also there few noob question,can I ask here or should I open another post.sorry for my broken english,hope guys could understand with bit imagination.btw I am from Melbourne.

bob_oz
bob_oz's picture
  • Online Status: Offline
  • Joined: 31/03/2011
  • Posts:
  • Post Number: #61
snorkel

very very very keen if the snorkel fits - cannot get here at all!

.

bob_oz
bob_oz's picture
  • Online Status: Offline
  • Joined: 31/03/2011
  • Posts:
  • Post Number: #62
WOW!! headlights

.

Joe King
Joe King's picture
  • Online Status: Offline
  • Joined: 27/04/2013
  • Posts:
  • Post Number: #63
Could someone please send the files to me?

Can't seem to find it on the site.

j0eking@hotmail.com.au

Cheers.

I find there are very few problems in life that can't be solved with a heavy pair of boots. That hill is no exception.
Stock standard '99 5 Door IO, with a few accessories and bling.

Claude io
Claude io's picture
  • Online Status: Offline
  • Joined: 11/10/2011
  • Posts:
  • Post Number: #64
file

We use to have a link to these file, but it no longer works. I have just send you a pdf files, hope it helps.

Happy io

GO-R
GO-R's picture
  • Online Status: Offline
  • Joined: 13/05/2012
  • Posts:
  • Post Number: #65
Hey guys, Is someone able to

Hey guys,

Is someone able to send me the pdf and/or the dxf?

gor.1993.23@me.com

 

Thanks!

1999 Pajero iO named Rex

245/75R16 Trail Digger, 2" KYB and King Spring Lift, 50mm Front Shock Spacers, 25mm Diff Drop Spacers, 50mm Rear Spring Spacers, Rear Hilux Shocks, Upgraded Pan Hard Rod, Bull Bar, Roof Racks and Winch.

bob_oz
bob_oz's picture
  • Online Status: Offline
  • Joined: 31/03/2011
  • Posts:
  • Post Number: #66
plate

sent

 

.

GO-R
GO-R's picture
  • Online Status: Offline
  • Joined: 13/05/2012
  • Posts:
  • Post Number: #67
Cheers mate. Got it.

Cheers mate. Got it.

1999 Pajero iO named Rex

245/75R16 Trail Digger, 2" KYB and King Spring Lift, 50mm Front Shock Spacers, 25mm Diff Drop Spacers, 50mm Rear Spring Spacers, Rear Hilux Shocks, Upgraded Pan Hard Rod, Bull Bar, Roof Racks and Winch.

GO-R
GO-R's picture
  • Online Status: Offline
  • Joined: 13/05/2012
  • Posts:
  • Post Number: #68
Bash Plate Dimensions

Is anyone able to tell me what the original width and heigh was of the .DXF.

When I import it into my software it comes in huge.

 

Cheers!

1999 Pajero iO named Rex

245/75R16 Trail Digger, 2" KYB and King Spring Lift, 50mm Front Shock Spacers, 25mm Diff Drop Spacers, 50mm Rear Spring Spacers, Rear Hilux Shocks, Upgraded Pan Hard Rod, Bull Bar, Roof Racks and Winch.

iulian
  • Online Status: Offline
  • Joined: 07/11/2013
  • Posts:
  • Post Number: #69
Not able to download the files

Hi everybody. I got my Pinin without the bash plate and I really need it. Could you please send me the files to iulian.gutu@gmail.com?
Thank you!

ThomasZA
  • Online Status: Offline
  • Joined: 10/11/2013
  • Posts:
  • Post Number: #70
Bash plate drawings

I'd also appreciate it if someone would be so kind to send me the files, especially the pdf.

thomas at spoelstra dot me

Thanks

Thomas

1995 Land Rover Discovery Td5

2001 Mitsubishi Pajero Pinin 2.0 GDi long body

2005 Volvo V70 d5

bob_oz
bob_oz's picture
  • Online Status: Offline
  • Joined: 31/03/2011
  • Posts:
  • Post Number: #71
bash plate mailed

done - mailed

.

Claude io
Claude io's picture
  • Online Status: Offline
  • Joined: 11/10/2011
  • Posts:
  • Post Number: #72
bash plate design...thanks to Fab72

I have one of the PDF file for the bash plate design made and paid by Fab72. Fab72 and opted to share the design for us to use. I don't know how to upload a PDF file so I changed it to a picture, at least every one can print it and use it.

Happy io

GO-R
GO-R's picture
  • Online Status: Offline
  • Joined: 13/05/2012
  • Posts:
  • Post Number: #73
Change in angle

Hi Guys,

 

Just a quick question.  I have had by bash plate cut, but am wondering about the 25 degree bend.

 

Because my car has a diff drop, would that mean, that the bend would have to be more? As the Diff is sitting lower?

 

Cheers

GOR

1999 Pajero iO named Rex

245/75R16 Trail Digger, 2" KYB and King Spring Lift, 50mm Front Shock Spacers, 25mm Diff Drop Spacers, 50mm Rear Spring Spacers, Rear Hilux Shocks, Upgraded Pan Hard Rod, Bull Bar, Roof Racks and Winch.

GO-R
GO-R's picture
  • Online Status: Offline
  • Joined: 13/05/2012
  • Posts:
  • Post Number: #74
Hello!

Kind of desperate for this information guys!

1999 Pajero iO named Rex

245/75R16 Trail Digger, 2" KYB and King Spring Lift, 50mm Front Shock Spacers, 25mm Diff Drop Spacers, 50mm Rear Spring Spacers, Rear Hilux Shocks, Upgraded Pan Hard Rod, Bull Bar, Roof Racks and Winch.

bob_oz
bob_oz's picture
  • Online Status: Offline
  • Joined: 31/03/2011
  • Posts:
  • Post Number: #75
bash plate bending

GO-R wrote:
Kind of desperate for this information guys!

 

OK - not likely,

the bash plate will simply angle up more - if anything the mounting holes will be further appart as the angle is slightly longer.

 

note: the bends in the plate are an approx fitment - you can make it fit much better by putting some extra folds in it - check out B-E-N-C's plate as it has an extra two folds.

 

mine now has these folds too but as a result of smashing into lots of things >:D

.

GO-R
GO-R's picture
  • Online Status: Offline
  • Joined: 13/05/2012
  • Posts:
  • Post Number: #76
HAHA

Hahah.

Thank you for getting back to me.  I'll get it bent today.

 

Cheers

GOR

 

1999 Pajero iO named Rex

245/75R16 Trail Digger, 2" KYB and King Spring Lift, 50mm Front Shock Spacers, 25mm Diff Drop Spacers, 50mm Rear Spring Spacers, Rear Hilux Shocks, Upgraded Pan Hard Rod, Bull Bar, Roof Racks and Winch.

AC
  • Online Status: Offline
  • Joined: 14/08/2014
  • Posts:
  • Post Number: #77
DXF

Hi Guys

I am also from South Africa, and would like to know if anyone can send me the DXF file for the Bash Plate?

I am also currently looking into building and designing my own Drawer System for my 2006 Pajero 3.2DID LWB

and would gladly share my drawings when I'm done if anyone is interested.

 

I have also came across guys that have made their own replacement bumpers, so will probably investigate that as well.

 

Regards

Armand

 

davejhb
davejhb's picture
  • Online Status: Offline
  • Joined: 20/05/2012
  • Posts:
  • Post Number: #78
Bash plate

Armand, send me your e-mail address I will send you a DXF file for the bash plate

deejay@netactive.co.za

South Africa - 03 Pajero io 2L MPI, 225/70/16 Bridgestone Dueler A/T, 3mm Stainless Steel Bash Plate.

helijohn
helijohn's picture
  • Online Status: Offline
  • Joined: 20/10/2014
  • Posts:
  • Post Number: #79
I have just removed the OE

I have just removed the OE sump cover/bash plate.  I don't do extreme off roading, just farm fields.  Can I happily leave the thing off; it is only a thin bit of tin and has a lot of holes cut in it?.

Work in progress on my just acquired delapidated  2003 Vivo 11 Junior in need of TLC    

Do it right, use Hammerite.

Why simpify when it is simpler to complicate.

 

Claude io
Claude io's picture
  • Online Status: Offline
  • Joined: 11/10/2011
  • Posts:
  • Post Number: #80
bash plate

Even if it is only very thin it still can save you by stopping something going in, like a small branch.....it only take 2 min to fit anyway.

Happy io

Timmo
  • Online Status: Offline
  • Joined: 19/05/2016
  • Posts:
  • Post Number: #81
Hi, we bought a 2002 LWB with

Hi, we bought a 2002 LWB with only 130k. Straight as!
Unfortunately has no bash plate, can someone please send me the template file?
Timodgers@hotmail.com
Thanks in advance
Will post pics

Timmo
  • Online Status: Offline
  • Joined: 19/05/2016
  • Posts:
  • Post Number: #82
Thanks got the design. Have

Thanks got the design.
Have been quoted $100 for it in 3mm Core 10 steel including the io logo
Anyone want to order one?
Should I use ally instead?

simmo777
simmo777's picture
  • Online Status: Offline
  • Joined: 01/11/2012
  • Posts:
  • Post Number: #83
bash plate

Up to you mate! I was lucky enough to get on the run of 6mm or 7mm aliminum ones that were done a while back..

Can't speak for Ali VS Steel but mines had an absolute work out and at stages been a the only point of contact at the front and it's still straight with a few  scratches.

If you intend to do more intense offroad I'd reccomend ali but then agian have no no experience with steel! $100 is cheap enough to give it a go I think!

2002 5dr Pajero IO QA 2.0L Auto - Lifted, Locked!! 1.925 Low Range - Muddies (205/80/16) - Redback Extractors to 200cell cat to dump at diff Exhaust 

fordem
  • Online Status: Offline
  • Joined: 19/06/2011
  • Posts:
  • Post Number: #84
Both have their pros & cons.

Steel is heavier, stronger & rusts; aluminum is lighter, less strong, so you need to use thicker plate, and rust is a non issue - aluminum is also softer and rocks will gouge it - whichever you choose, do not use checker or diamond plate.

Claude io
Claude io's picture
  • Online Status: Offline
  • Joined: 11/10/2011
  • Posts:
  • Post Number: #85
bash plate

My plate is 5 mm thick (from memory) alloy and I have checker plate, I think that it look better than plain alloy and age a bit better as you don't see the mark as much.  As above, I will add that alloy is more $$$ and that the noise when you hit a small rock is much nicer on alloy than steel. 

Both will protect the car the same. 

fordem
  • Online Status: Offline
  • Joined: 19/06/2011
  • Posts:
  • Post Number: #86
It's your car

Flat plate slides over rocks more easily than checker plate - but hey - it's your money, it's your car - that by the way is also one of the advantages of steel, it slides more easily than aluminum, the rocks gouge the softer aluminum, but slide aganst the steel.

Put a piece of checker plate down on sand and push it, put the same sized piece of flat plate down and push it - which one slides more freely - this can be the difference between getting bogged or making it through.

 

Claude io
Claude io's picture
  • Online Status: Offline
  • Joined: 11/10/2011
  • Posts:
  • Post Number: #87
lol

fordem wrote:

Flat plate slides over rocks more easily than checker plate - but hey - 

Put a piece of checker plate down on sand and push it, put the same sized piece of flat plate down and push it - which one slides more freely - this can be the difference between getting bogged or making it through.

 

Lol, spray it with silicon it will slide so much more...lol....wink

yes true but the difference won't get you stuck from one to the other.  If anything the io insert will tend to stop you a bit more than the checker plate.

Anyway if a rock touch the front of the plate,..stopping might not be a bad option....

The very big advantage of steel is the cost. 

Happy io

gavin
  • Online Status: Offline
  • Joined: 22/02/2017
  • Posts:
  • Post Number: #88
sorry to drag up an old

sorry to drag up an old thread but could someone please send me the dxf and pdf files, my shogun pinin (uk pajero io) has no underbody protection

gavin......@hotmail.co.uk

many thanks

Edited by admin, deleted personnal detail.

Claude io
Claude io's picture
  • Online Status: Offline
  • Joined: 11/10/2011
  • Posts:
  • Post Number: #89
bash plate design

Hello Gavin,

In the post above (post 72 now) I have the desing of the bash plate. That should be what you need. If not let us now

Happy io

gavin
  • Online Status: Offline
  • Joined: 22/02/2017
  • Posts:
  • Post Number: #90
could some one please send me

could do with the auto cad (dxf file) so i can get one of the machinests i work with to cut one out on our waterjet.  i work for a fabrication company as a welder, i could draw it out by hand but on the cutter would be so much nicer

cheers though i have saved the photo above just in case

Claude io
Claude io's picture
  • Online Status: Offline
  • Joined: 11/10/2011
  • Posts:
  • Post Number: #91
bash plate

I understand....I don't have the dxf but I can send you the pdf if you wish.

Happy io

gavin
  • Online Status: Offline
  • Joined: 22/02/2017
  • Posts:
  • Post Number: #92
cheers mate, if you could

cheers mate, if you could there may be a way of converting it

thanks

Claude io
Claude io's picture
  • Online Status: Offline
  • Joined: 11/10/2011
  • Posts:
  • Post Number: #93
bash plate

gavin wrote:

cheers mate, if you could there may be a way of converting it

thanks

Done....

Happy io

simmo777
simmo777's picture
  • Online Status: Offline
  • Joined: 01/11/2012
  • Posts:
  • Post Number: #94
DXF

Gavin!

PM us buddy I have the DXF file and PDF for the bashplate! Just need your email (or will facebook you after work)

2002 5dr Pajero IO QA 2.0L Auto - Lifted, Locked!! 1.925 Low Range - Muddies (205/80/16) - Redback Extractors to 200cell cat to dump at diff Exhaust 

amunga
amunga's picture
  • Online Status: Offline
  • Joined: 07/07/2017
  • Posts:
  • Post Number: #95
Hey guys! Is this bash plate

Hey guys! Is this bash plate file still available? Sorry for dragging up old ghosts but coule i get both DXF and PDF.....Could someone please email it (them) to me at eshuchiz@gmail.com..thanks!

allroad1966
  • Online Status: Offline
  • Joined: 24/10/2017
  • Posts:
  • Post Number: #96
File bashplate

Fellows,
Is someone as friendly to send me the DXF or the PDF file

Syndicate

Syndicate content

Translate This Site Into Your Language