Pajero io lift for sale. Spacer and spring only

3 replies [Last post]
Claude io
Claude io's picture
  • Online Status: Online
  • Joined: 11/10/2011
  • Posts:

The 37 mm spacer for the front strut are used but in very good condition. They are made of acetal (great if not the best quality)

$160 freight included within Australia only.

I also have a set of spring for the rear (from the Mazda Astina). These should match the front lift that give the spacer (give or take). Extra $50, so $210 freight included for both.

Negotiable....

 

Similar to these but the middle is drilled through. I will put the actual picture of the spacer later on

Happy io

Claude io
Claude io's picture
  • Online Status: Online
  • Joined: 11/10/2011
  • Posts:
  • Post Number: #1
Pajero io lift strut spacer

Sorry these spacer are now sold.

The spring are still here.

If someone wants some spacer, let me know as I should be able to get some more done...PM me

Happy io

Claude io
Claude io's picture
  • Online Status: Online
  • Joined: 11/10/2011
  • Posts:
  • Post Number: #2
pajero io spacer

 A few have asked about spacer, so....

From mid december I will be able to make front spacer, same as above thread but the main hole completely through them. 

Price based on thickness, $120 for around 19 mm, $150 for around 37mm. Made of black acetal, light and strong. Limited number.....price are for 1 set ( 2 spacers)

The 37 mm should match well with the mazda spring at the rear, it did when fitted on my car, and many other ! 

The 19 mm should match well with the mazda spring at the rear, with high pan strut with front spring from io lower pan spring on the front, as done by Bob and a few other.

Size is up to you and your choice ! It is also your full responsability as they may be illegal in some place.

Postage included with tracking, Australia only. 

Happy io

 

 

Claude io
Claude io's picture
  • Online Status: Online
  • Joined: 11/10/2011
  • Posts:
  • Post Number: #3
spacer

I still have some material (black acetal) , I do not have much time but I can still do the spacer or send you material to make them yourself. That will work out about half price.

Happy io

Syndicate

Syndicate content

Translate This Site Into Your Language